Home / Products / Stainless Steel Cleaning & Passivation / E-NOX Products / E-NOX Clean
E-NOX Clean is a highly concentrated, water-based acidic cleaner designed to remove stubborn mineral deposits such as limescale and cement, as well as rust and light oil and grease contamination.
Its pasty consistency helps it cling to vertical surfaces, strainers, rolls and other difficult areas, allowing the cleaner time to penetrate and work on persistent contamination rather than simply running off.
E-NOX Clean is ready to use and can be applied with a brush. After allowing sufficient time to react, rinse thoroughly with water. For particularly stubborn contamination, a sponge or brush can be used to increase the cleaning action.
A material compatibility test on an inconspicuous area is recommended before use.
E-NOX Clean provides an effective solution where conventional alkaline or neutral cleaners are unable to remove mineral deposits, oxidation and other acid-soluble contamination.
Please note: E-NOX Clean is classified as Dangerous Goods for transport (UN 1760). Freight will be quoted separately after your order is submitted, and we will contact you to arrange delivery and payment of the freight charge.
Chemical characterisation: Water-based, acidic cleaning agent
Appearance: Yellow liquid
pH value: Approx. 1.5
Density: Approx. 1.10 g/cm³ at 20°C
Flash point: Not relevant
VOC content: 5% by weight
Transport classification: Dangerous Goods – UN 1760, Corrosive Liquid, N.O.S. (Phosphoric Acid)
Storage temperature: 2°C to 35°C
Shelf life: At least 12 months in unopened original packaging